- Configure three 12 h simulations into one 36 h simulation
- Create EMITIMES file for emissions
- Set emissions to zero in CONTROL
control_volc.txt |    load control file |
setup_volc.txt |    load setup file |



36 |    run duration |

0.0 |    emission rate and duration |

EMITIMES |    emission file name |
Creating EMITIMES for the 1st time




1200 |    emission duration |

Use Notepad to create emission rates and new times
LABEL | Diameter | Percent | Release Rate |
P006 | 0.6μm | 1% | 0.008E+16 |
P020 | 2.0μm | 7% | 0.068E+16 |
P060 | 6.0μm | 25% | 0.250E+16 |
P200 | 20.0μm | 67% | 0.670E+16 |

14 12 |    create new time group |
15 00 |    create new time group |
12000 |    revised emission height |
Run Model

All radiobutton |    sum all pollutants |
100+50+20+10 |    force contours μg |
1.0E+16 |    multiplier |


|